Quality of Service Commands
311
M4100 Series ProSAFE Managed Switches
no periodic
Use this command to delete a periodic time entry from a time range.
periodic time
Use this command to configure the start or end time for the time range.
show time-range
Use this command to display a time range and all the absolute/periodic time entries that are
defined for the time range. Use the [<name>] parameter to identify a specific time range to
display. When [<name>] is not specified, all the time ranges defined in the system are
displayed.
Format periodic <frequency> {<days-of-the-week> <time>} to
{[<days-of-the-week>] <time>}
Mode Time-Range Config
Format no periodic <frequency> {<days-of-the-week> <time>} to
{[<days-of-the-week>] <time>}
Mode Time-Range Config
Format periodic {start | end} time
Mode Time-Range Config
Format show time-range [<name>]
Mode Privileged EXEC
Term Definition
Number of Time
Ranges
Number of time ranges configured in the system.
Time Range Name Name of the time range.
Time Range Status Status of the time range (active/inactive).
Absolute start Start time and day for absolute time entry.
Absolute end End time and day for absolute time entry.
Periodic Entries Number of periodic entries in a time-range.
Periodic start Start time and day for periodic entry.
Periodic end End time and day for periodic entry.
To Next Page
Loading...
Need help?
General
