NETGEAR M4100 Series ProSAFE User Manual

Management Commands
458
M4100 Series ProSAFE Managed Switches
sshcon maxsessions
Use this command to specify the maximum number of SSH connection sessions that can be
established. A value of 0 indicates that no ssh connection can be established. The range is
0–5.
no sshcon maxsessions
Use this command to set the maximum number of allowed SSH connection sessions to the
default value.
sshcon timeout
Use this command to set the SSH connection session time-out value, in minutes. A session is
active as long as the session has been idle for the value set. The time is a decimal value from
1 to 160.
Changing the time-out value for active sessions does not become effective until the session
is re accessed. Also, any keystroke activates the new time-out duration.
no sshcon timeout
Use this command to set the SSH connection session timeout value, in minutes, to the
default.
Changing the timeout value for active sessions does not become effective until the session is
re accessed. Also, any keystroke activates the new timeout duration.
Default 5
Format sshcon maxsessions <0-5>
Mode Privileged EXEC
Format no sshcon maxsessions
Mode Privileged EXEC
Default 5
Format sshcon timeout <1-160>
Mode Privileged EXEC
Format no sshcon timeout
Mode Privileged EXEC

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)