Log Messages
535
M4100 Series ProSAFE Managed Switches
Utilities
Table 6. Trap Mgr Log Message
Component Message Cause
Trap Mgr Link Up/Down: slot/port An interface changed link state.
Table 7. DHCP Filtering Log Messages
Component Message Cause
DHCP Filtering Unable to create r/w lock for DHCP
Filtering
Unable to create semaphore used for dhcp
filtering configuration structure .
DHCP Filtering Failed to register with nv Store. Unable to register save and restore
functions for configuration save
DHCP Filtering Failed to register with NIM Unable to register with NIM for interface
callback functions
DHCP Filtering Error on call to sysapiCfgFileWrite file Error on trying to save configuration .
Table 8. NVStore Log Messages
Component Message Cause
NVStore Building defaults for file XXX A component’s configuration file does not
exist or the file’s checksum is incorrect so
the component’s default configuration file is
built.
NVStore Error on call to osapiFsWrite routine on file
XXX
Either the file cannot be opened or the OS’s
file I/O returned an error trying to write to
the file.
NVStore File XXX corrupted from file system.
Checksum mismatch.
The calculated checksum of a component’s
configuration file in the file system did not
match the checksum of the file in memory.
NVStore Migrating config file XXX from version Y to
Z
A configuration file version mismatch was
detected so a configuration file migration
has started.
To Next Page
Loading...
Need help?
General
