NETGEAR M4100 Series ProSAFE User Manual

Log Messages
536
M4100 Series ProSAFE Managed Switches
Table 9. RADIUS Log Messages
Component Message Cause
RADIUS RADIUS: Invalid data length - xxx The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Failed to send the request A problem communicating with the
RADIUS server.
RADIUS RADIUS: Failed to send all of the request A problem communicating with the
RADIUS server during transmit.
RADIUS RADIUS: Could not get the Task Sync
semaphore!
Resource issue with RADIUS Client
service.
RADIUS RADIUS: Buffer is too small for response
processing
RADIUS Client attempted to build a
response larger than resources allow.
RADIUS RADIUS: Could not allocate accounting
requestInfo
Resource issue with RADIUS Client
service.
RADIUS RADIUS: Could not allocate requestInfo Resource issue with RADIUS Client
service.
RADIUS RADIUS: osapiSocketRecvFrom returned
error
Error while attempting to read data from the
RADIUS server.
RADIUS RADIUS: Accounting-Response failed to
validate, id=xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: User (xxx) needs to respond for
challenge
An unexpected challenge was received for
a configured user.
RADIUS RADIUS: Could not allocate a buffer for the
packet
Resource issue with RADIUS Client
service.
RADIUS RADIUS: Access-Challenge failed to
validate, id=xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Failed to validate
Message-Authenticator, id=xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Access-Accpet failed to validate,
id=xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Invalid packet length – xxx The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Response is missing
Message-Authenticator, id=xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Server address does not match
configured server
RADIUS Client received a server response
from an unconfigured server.

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)