Quality of Service Commands
268
M4100 Series ProSAFE Managed Switches
The following information is repeated for each user priority.
show classofservice ip-precedence-mapping
This command displays the current IP Precedence mapping to internal traffic classes for a
specific interface. The <slot/port> parameter is optional and is only valid on platforms
that support independent per-port Class of Service mappings. If specified, the IP Precedence
mapping table of the interface is displayed. If omitted, the most recent global configuration
settings are displayed.
The following information is repeated for each user priority.
show classofservice ip-dscp-mapping
This command displays the current IP DSCP mapping to internal traffic classes for the global
configuration settings.
The following information is repeated for each user priority.
Format show classofservice dot1p-mapping [<slot/port>]
Mode Privileged EXEC
Term Definition
User Priority The 802.1p user priority value.
Traffic Class The traffic class internal queue identifier to which the user priority value is mapped.
Format show classofservice ip-precedence-mapping [<slot/port>]
Mode Privileged EXEC
Term Definition
IP Precedence The IP Precedence value.
Traffic Class The traffic class internal queue identifier to which the IP Precedence value is mapped.
Format show classofservice ip-dscp-mapping
Mode Privileged EXEC
Term Definition
IP DSCP The IP DSCP value.
Traffic Class The traffic class internal queue identifier to which the IP DSCP value is mapped.
To Next Page
Loading...
Need help?
General
