NETGEAR M4100 Series ProSAFE User Manual

Switching Commands
171
M4100 Series ProSAFE Managed Switches
no set mld maxresponse
Use this command to set the max response time (on the interface or VLAN) to the default
value.
• Global Config
• Interface Config
• VLAN Mode
set mld mcrtexpiretime
Use this command to set the Multicast Router Present Expiration time. The time is set for the
system, on a particular interface or VLAN. This is the amount of time in seconds that a switch
waits for a query to be received on an interface before the interface is removed from the list
of interfaces with multicast routers attached. The range is 0–3600 seconds. A value of 0
indicates an infinite timeout, that is, no expiration.
• Global Config
• Interface Config
no set mld mcrtexpiretime
Use this command to set the Multicast Router Present Expiration time to 0. The time is set for
the system, on a particular interface or a VLAN.
• Global Config
• Interface Config
set mld mrouter
Use this command to configure the VLAN ID for the VLAN that has the multicast router
attached mode enabled.
Format no set mld maxresponse
Mode
Default 0
Format set mld mcrtexpiretime <vlan-id> <0-3600>
Mode
Format no set mld mcrtexpiretime <vlan-id>
Mode
Format set mld mrouter <vlan-id>
Mode
Interface Config

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)