EasyManuals Logo

NETGEAR M4100 Series ProSAFE User Manual

NETGEAR M4100 Series ProSAFE
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #410 background imageLoading...
Page #410 background image
Utility Commands
410
M4100 Series ProSAFE Managed Switches
no debug ip igmp packet
Use this command to disable debug tracing of IGMP packet reception and transmission.
debug ip mcache packet
Use this command for tracing MDATA packet reception and transmission. If you use the
receive option, only received MDATA packets are traced. If you use the transmit option,
only transmitted MDATA packets are traced. When neither keyword is used in the command,
then all data packet traces are dumped. Vital information such as source address, destination
address, packet length, and the interface on which the packet is received or transmitted is
displayed on the console.
no debug ip mcache packet
Use this command to disable debug tracing of MDATA packet reception and transmission.
debug ip pimdm packet
Use this command to trace PIMDM packet reception and transmission. If you use the
receive option, only received PIMDM packets are traced. If you use the transmit option,
only transmitted PIMDM packets are traced. When neither keyword is used in the command,
then all PIMDM packet traces are dumped. Vital information such as source address,
destination address, control packet type, packet length, and the interface on which the packet
is received or transmitted is displayed on the console.
Format no debug ip igmp packet [receive | transmit]
Mode Privileged EXEC
Default disabled
Format debug ip mcache packet [receive | transmit]
Mode Privileged EXEC
Format no debug ip mcache packet [receive | transmit]
Mode Privileged EXEC
Default disabled
Format debug ip pimdm packet [receive | transmit]
Mode Privileged EXEC

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General IconGeneral
Product TypeManaged Switch
Form FactorRack-mountable
LayerLayer 2/Layer 3
ManagementWeb-based, CLI, SNMP
VLAN SupportYes
Quality of Service (QoS)Yes
Security FeaturesACLs, 802.1x
DimensionsVaries by model
WeightVaries by model
Operating Temperature32°F to 122°F (0°C to 50°C)
Storage Temperature-20° to 70° C (-4° to 158° F)
PoE SupportYes (on select models)

Related product manuals