NETGEAR M4100 Series ProSAFE User Manual

Management Commands
464
M4100 Series ProSAFE Managed Switches
no ip http session soft-timeout
Use this command to reset the soft time-out for unsecure HTTP sessions to the default value.
ip http secure-session maxsessions
Use this command to limit the number of secure HTTP sessions. Zero is the configurable
minimum.
no ip http secure-session maxsessions
Use this command to restore the number of allowable secure HTTP sessions to the default
value.
ip http secure-session soft-timeout
Use this command to configure the soft time-out for secure HTTP sessions in minutes. When
this time-out expires, you must reauthenticate. This timer begins on initiation of the web
session and is restarted with each access to the switch. The secure session soft time-out
cannot be set to zero (infinite).
no ip http secure-session soft-timeout
Use this command to restore the soft time-out for secure HTTP sessions to the default value.
Format no ip http session soft-timeout
Mode Privileged EXEC
Default 16
Format ip http secure-session maxsessions <0-16>
Mode Privileged EXEC
Format no ip http secure-session maxsessions
Mode Privileged EXEC
Default 5
Format ip http secure-session soft-timeout <1-60>
Mode Privileged EXEC
Format no ip http secure-session soft-timeout
Mode Privileged EXEC

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)