Log Messages
553
M4100 Series ProSAFE Managed Switches
Stacking
Table 51. PIM-DM Log Messages
Component Message Cause
PIM-DM Out of memory when creating xxx This message is logged when there is
insufficient memory to accommodate a new
neighbor/(S,G) Entry, Prune, Graft, Join
etc.
PIM-DM Error entry->ll_xxx LL creation error This message is logged when the SLL
creation is Failed.
PIM-DM pim_interface_set: Could not give
taskSema
This message is logged when Task
synchronization Semaphore release fails.
PIM-DM Error initializing CACHE This message is logged when the PIM-DM
(S,G) entry Cache table initialization fails.
PIM-DM Error creating PIM-DM pipe This message is logged when the PIM-DM
Pipe (that receives control messages)
creation fails.
Table 52. DVMRP Log Messages
Component Message Cause
DVMRP dvmrp_send_graft: failed getting memory
for graft
Failed to allocate memory while sending a
graft
DVMRP dvmrp_register_neighbor: failed getting
memory for nbr
Failed to allocate memory while registering
a neighbor
DVMRP dvmrp_recv_prune: failed getting memory
for prune
Failed to allocate memory while receiving a
prune
DVMRP dvmrp_new_route: failed getting memory
for route
Failed to get memory for a new route entry
DVMRP dvmrp_prepare_routes: failed getting
memory for dvmrp_ann_rt
Failed to get memory while announcing a
new route entry
Table 53. EDB Log Message
Component Message Cause
EDB EDB Callback: Unit Join: <num>. Unit <num> has joined the stack.
To Next Page
Loading...
Need help?
General
