NETGEAR M4100 Series ProSAFE User Manual

Utility Commands
353
M4100 Series ProSAFE Managed Switches
Logging Commands
This section describes the commands you use to configure system logging, and to view logs
and the logging settings.
logging buffered
This command enables logging to an in-memory log that keeps up to 128 logs.
no logging buffered
This command disables logging to in-memory log.
logging buffered wrap
This command enables wrapping of in-memory logging when the log file reaches full
capacity. Otherwise when the log file reaches full capacity, logging stops.
no logging buffered wrap
This command disables wrapping of in-memory logging and configures logging to stop when
the log file capacity is full.
Default disabled; critical when enabled
Format logging buffered
Mode Global Config
Format no logging buffered
Mode Global Config
Default enabled
Format logging buffered wrap
Mode Privileged EXEC
Format no logging buffered wrap
Mode Privileged EXEC

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)