Utility Commands
413
M4100 Series ProSAFE Managed Switches
no debug ipv6 mld packet
Use this command to disable debug tracing of MLDv6 packet reception and transmission.
debug ipv6 pimdm packet
Use this command to trace PIMDMv6 packet reception and transmission. If you use the
receive option, only received PIMDMv6 packets are traced. If you use the transmit
option, only transmitted PIMDMv6 packets are traced. When neither keyword is used in the
command, then all PIMDMv6 packet traces are dumped. Vital information such as source
address, destination address, control packet type, packet length, and the interface on which
the packet is received or transmitted is displayed on the console.
no debug ipv6 pimdm packet
Use this command to disable debug tracing of PIMDMv6 packet reception and transmission.
debug ipv6 pimsm packet
Use this command to trace PIMSMv6 packet reception and transmission. If you use the
receive option, only received PIMSMv6 packets are traced. If you use the transmit
option, only transmitted PIMSMv6 packets are traced.When neither keyword is used in the
command, then all PIMSMv6 packet traces are dumped. Vital information such as source
address, destination address, control packet type, packet length, and the interface on which
the packet is received or transmitted is displayed on the console.
Default disabled
Format debug ipv6 mld packet [receive | transmit]
Mode Privileged EXEC
Format no debug ipv6 mld packet [receive | transmit]
Mode Privileged EXEC
Default disabled
Format debug ipv6 pimdm packet [receive | transmit]
Mode Privileged EXEC
Format no debug ipv6 pimdm packet [receive | transmit]
Mode Privileged EXEC
To Next Page
Loading...
Need help?
General
