NETGEAR M4100 Series ProSAFE

Utility Commands
409
M4100 Series ProSAFE Managed Switches
no debug ip acl
Use this command to disable debug of IP Protocol packets matching the ACL criteria.
debug ip dvmrp packet
Use this command to trace DVMRP packet reception and transmission. If you use the
receive option, only received DVMRP packets are traced. If you use the transmit option,
only transmitted DVMRP packets are traced. When neither keyword is used in the command,
then all DVMRP packet traces are dumped. Vital information such as source address,
destination address, control packet type, packet length, and the interface on which the packet
is received or transmitted is displayed on the console.
no debug ip dvmrp packet
Use this command to disable debug tracing of DVMRP packet reception and transmission.
debug ip igmp packet
Use this command to trace IGMP packet reception and transmission. If you use the receive
option, only received IGMP packets are traced. If you use the transmit option, only
transmitted IGMP packets are traced. When neither keyword is used in the command, then
all IGMP packet traces are dumped. Vital information such as source address, destination
address, control packet type, packet length, and the interface on which the packet is received
or transmitted is displayed on the console.
Format no debug ip acl <acl-number>
Mode Privileged EXEC
Default disabled
Format debug ip dvmrp packet [receive | transmit]
Mode Privileged EXEC
Format no debug ip dvmrp packet [receive | transmit]
Mode Privileged EXEC
Default disabled
Format debug ip igmp packet [receive | transmit]
Mode Privileged EXEC