Utility Commands
352
M4100 Series ProSAFE Managed Switches
no terminal length
Use this command to set the terminal length to the default value of 24 lines.
show terminal length
Use this command to display the value of the user-configured terminal length size.
memory free low-watermark processor
Use this command to get notifications when the CPU free memory falls below the configured
threshold. A notification is generated when the free memory falls below the threshold.
Another notification is generated once the available free memory rises to 10 percent above
the specified threshold. To prevent generation of excessive notifications when the CPU free
memory fluctuates around the configured threshold, only one Rising or Falling memory
notification is generated over a period of 60 seconds. The threshold is specified in kilobytes.
The CPU free memory threshold configuration is saved across a switch reboot.
Format terminal length <number>
Mode Privileged EXEC
Format no terminal length
Mode Privileged EXEC
Format show terminal length
Mode Privileged EXEC
Format memory free low-watermark processor <1-1034956>
Mode Global Config
Parameter Description
low-watermark When CPU free memory falls below this threshold, a notification message is triggered.
The range is 1 to the maximum available memory on the switch. The default is 0
(disabled).
To Next Page
Loading...
Need help?
General
