NETGEAR M4100 Series ProSAFE User Manual

Utility Commands
424
M4100 Series ProSAFE Managed Switches
no debug udld packet transmit
This command enables debugging on the transmitted UDLD PDUs.
debug aaa accounting
This command is useful for debugging accounting configuration and functionality in User
Manager.
no debug aaa accounting
Use this command to turn off debugging of User Manager accounting functionality.
debug aaa authorization
This command is useful for debugging authorization configuration and functionality in User
Manager.
no debug aaa authorization
Use this command to turn off debugging of User Manager authorization functionality.
Format debug udld packet transmit
Mode Privileged EXEC
Format debug aaa accounting
Mode Privileged EXEC
Format no debug aaa accounting
Mode Privileged EXEC
Format debug aaa authorization [commands | exec]
Mode Privileged EXEC
Format no debug aaa authorization
Mode Privileged EXEC

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)