NETGEAR M4100 Series ProSAFE User Manual

Management Commands
459
M4100 Series ProSAFE Managed Switches
show ip ssh
Use this command to display the ssh settings.
Management Security Commands
This section describes commands you use to generate keys and certificates, which you can
do in addition to loading them as before.
crypto certificate generate
Use this command to generate self-signed certificate for HTTPS. The generate RSA key for
SSL has a length of 1024 bits. The resulting certificate is generated with a common name
equal to the lowest IP address of the device and a duration of 365 days.
Format show ip ssh
Mode Privileged EXEC
Term Definition
Administrative
Mode
This field indicates whether the administrative mode of SSH is enabled or disabled.
Protocol Level The protocol level might have the values of version 1, version 2 or both versions 1 and
version 2.
SSH Sessions
Currently Active
The number of SSH sessions currently active.
Max SSH
Sessions
Allowed
The maximum number of SSH sessions allowed.
SSH Timeout The SSH time-out value in minutes.
Keys Present Indicates whether the SSH RSA and DSA key files are present on the device.
Key Generation
in Progress
Indicates whether RSA or DSA key files generation is currently in progress.
Format crypto certificate generate
Mode Global Config

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)