NETGEAR M4100 Series ProSAFE User Manual

Using the Command-Line Interface
13
M4100 Series ProSAFE Managed Switches
Global Config From the Privileged EXEC mode,
enter configure.
To exit to the Privileged EXEC mode, enter exit, or
press Ctrl-Z.
VLAN Config From the Privileged EXEC mode,
enter vlan database.
To exit to the Privileged EXEC mode, enter exit, or
press Ctrl-Z.
Interface Config From the Global Config mode,
enter
interface <slot/port> or
interface loopback <id> or
interface tunnel <id>
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-Z.
Line Config From the Global Config mode,
enter lineconfig.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-Z.
Policy-Map Config From the Global Config mode,
enter policy-map <name>.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-Z.
Policy-Class-Map
Config
From the Policy Map mode enter
class.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-Z.
Class-Map Config From the Global Config mode,
enter class-map, and specify the
optional keyword ipv4 to specify
the Layer 3 protocol for this class.
See class-map on page 272 for
more information.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-Z.
Ipv6-Class-Map
Config
From the Global Config mode,
enter class-map and specify the
optional keyword ipv6
to specify
the Layer 3 protocol for this class.
See class-map on page 272 for
more information.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-Z.
MAC Access-list
Config
From the Global Config mode,
enter mac access-list
extended <name>.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-Z.
TACACS Config From the Global Config mode,
enter tacacs-server host
<ip-addr>, in which <ip-addr>
is the IP address of the TACACS
server on your network.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-Z.
DHCP Pool Config From the Global Config mode,
enter ip dhcp pool
<pool-name>.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-Z.
ARP Access-List
Config Mode
From the Global Config mode,
enter arp access-list.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-Z.
Table 6. CLI Mode Access and Exit (continued)
Command Mode Access Method Exit or Access Previous Mode

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)