NETGEAR M4100 Series ProSAFE User Manual

Switching Commands
197
M4100 Series ProSAFE Managed Switches
Command example:
(NETGEAR Switch) #show lldp med local-device detail 0/8
LLDP MED Local Device Detail
Interface: 0/8
Network Policies
Media Policy Application Type : voice
Vlan ID: 10
Priority: 5
DSCP: 1
Unknown: False
Tagged: True
Media Policy Application Type : streamingvideo
Vlan ID: 20
Priority: 1
DSCP: 2
Unknown: False
Tagged: True
Inventory
Hardware Rev: xxx xxx xxx
Firmware Rev: xxx xxx xxx
Software Rev: xxx xxx xxx
Serial Num: xxx xxx xxx
Mfg Name: xxx xxx xxx
Model Name: xxx xxx xxx
Asset ID: xxx xxx xxx
Unknown Indicates if the policy type is unknown. In this case, the VLAN ID, Priority and DSCP
are ignored.
Tagged Indicates if the policy type is using tagged or untagged VLAN.
Hardware Rev Shows the local hardware version.
Firmware Rev Shows the local firmware version.
Software Rev Shows the local software version.
Serial Num Shows the local serial number.
Mfg Name Shows the manufacture name.
Model Name Shows the model name.
Term Definition

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)