NETGEAR M4100 Series ProSAFE User Manual

Switching Commands
200
M4100 Series ProSAFE Managed Switches
Command example:
(NETGEAR Switch) #show lldp med remote-device detail 0/8
LLDP MED Remote Device Detail
Local Interface: 0/8
Remote Identifier: 18
Capabilities
MED Capabilities Supported: capabilities, networkpolicy, location, extendedpse
MED Capabilities Enabled: capabilities, networkpolicy
Device Class: Endpoint Class I
Network Policies
Media Policy Application Type : voice
Vlan ID: 10
Priority: 5
DSCP: 1
Unknown: False
Tagged: True
Media Policy Application Type : streamingvideo
Vlan ID: 20
Priority: 1
DSCP: 2
Unknown: False
Tagged: True
Model Name Shows the model name of the remote device.
Asset ID Shows the asset id of the remote device.
Sub Type Shows the type of location information.
Location
Information
Shows the location information as a string for a type of location ID.
Device Type Shows the remote device’s PoE device type connected to this port.
Available Shows the remote port’s PSE power value in tenths of a watt.
Source Shows the remote port’s PSE power source.
Priority Shows the remote port’s PSE priority.
Required Shows the remote port’s PD power requirement.
Source Shows the remote port’s PD power source.
Priority Shows the remote port’s PD power priority.
Term Definition

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)