Name: NETGEAR M4100 Series ProSAFE
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Quality of Service Commands

282

M4100 Series ProSAFE Managed Switches

redirect

This command specifies that all incoming packets for the associated traffic stream are

redirected to a specific egress interface (physical port or port-channel).

conform-color

Use this command to enable color-aware traffic policing and define the conform-color class

map. Used with the police command where the fields for the conform level are specified. The

<class-map-name> parameter is the name of an existing DiffServ class map.

Note: This command might only be used after specifying a police command

for the policy-class instance.

class

This command creates an instance of a class definition within the specified policy for defining

treatment of the traffic class through subsequent policy attribute statements. The

<classname> is the name of an existing DiffServ class.

Note: This command causes the specified policy to create a reference to the

class definition.

Note: The CLI mode is changed to Policy-Class-Map Config when this

command is successfully executed.

Format redirect <slot/port>

Mode Policy-Class-Map Config

Incompatibilities Drop, Mirror

Format conform-color <class-map-name>

Mode Policy-Class-Map Config

Format class <classname>

Mode Policy-Map Config

Questions and Answers:

Need help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General