Green Ethernet Commands
531
M4100 Series ProSAFE Managed Switches
Command example:
(NETGEAR Switch)#show green-mode eee-lpi-history interface 0/1
Sampling Interval (sec)........................ 30
Total No. of Samples to Keep................... 168
Percentage LPI time per stack.................. 29
Percentage of Percentage of
Sample Time Since Time spent in Time spent in
No. The Sample LPI mode since LPI mode since
Was Recorded last sample last reset
------ -------------------- -------------- --------------
10 0d:00:00:13 3 2
9 0d:00:00:44 3 2
8 0d:00:01:15 3 2
7 0d:00:01:46 3 2
6 0d:00:02:18 3 2
5 0d:00:02:49 3 2
4 0d:00:03:20 3 2
3 0d:00:03:51 3 1
2 0d:00:04:22 3 1
1 0d:00:04:53 3 1
Percentage LPI time per stack Percentage of Total time spent in LPI mode by all port in stack
when compared to total time since reset.
Sample No Sample Index
Sample Time Time since last reset
%time spent in LPI mode since last sample Percentage of time spent in LPI mode on this port when compared
to sampling interval
%time spent in LPI mode since last reset Percentage of total time spent in LPI mode on this port when
compared to time since reset.
Field Description
To Next Page
Loading...
Need help?
General
