NETGEAR M4100 Series ProSAFE User Manual

Log Messages
542
M4100 Series ProSAFE Managed Switches
Table 22. IP Subnet VLANS Log Messages
Component Message Cause
IPsubnet vlans ERROR vlanIpSubnetSubnetValid :Invalid
subnet
Occurs when an invalid pair of subnet and
netmask has come from the CLI
IPsubnet vlans IP Subnet Vlans: failed to save
configuration
This message appears when save
configuration of subnet vlans failed
IPsubnet vlans vlanIpSubnetCnfgrInitPhase1Process:
Unable to create r/w lock for vlanIpSubnet
Appears when a read/write lock creations
fails
IPsubnet vlans vlanIpSubnetCnfgrInitPhase2Process:
Unable to register for VLAN change
callback
Appears when this component unable to
register for VLAN change notifications
IPsubnet vlans vlanIpSubnetCnfgrFiniPhase1Process:
could not delete avl semaphore
Appears when a semaphore deletion of this
component fails.
IPsubnet vlans vlanIpSubnetDtlVlanCreate: Failed Appears when a dtl call fails to add an entry
into the table
IPsubnet vlans vlanIpSubnetSubnetDeleteApply: Failed Appears when a dtl fails to delete an entry
from the table
IPsubnet vlans vlanIpSubnetVlanChangeCallback: Failed
to add an Entry
Appears when a dtl fails to add an entry for
a VLAN add notify event.
IPsubnet vlans vlanIpSubnetVlanChangeCallback: Failed
to delete an Entry
Appears when a dtl fails to delete an entry
for a VLAN delete notify event.
Table 23. Mac-based VLANs Log Messages
Component Message Cause
Mac based
VLANS
MAC VLANs: Failed to save configuration This message appears when save
configuration of Mac VLANs failed
Mac based
VLANS
vlanMacCnfgrInitPhase1Process: Unable
to create r/w lock for vlanMac
Appears when a read/write lock creations
fails
Mac based
VLANS
Unable to register for VLAN change
callback
Appears when this component unable to
register for VLAN change notifications
Mac based
VLANS
vlanMacCnfgrFiniPhase1Process: could
not delete avl semaphore
Appears when a semaphore deletion of this
component fails.
Mac based
VLANS
vlanMacAddApply: Failed to add an entry Appears when a dtl call fails to add an entry
into the table
Mac based
VLANS
vlanMacDeleteApply: Unable to delete an
Entry
Appears when a dtl fails to delete an entry
from the table

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)