NETGEAR M4100 Series ProSAFE

Switching Commands
62
M4100 Series ProSAFE Managed Switches
Command example:
(NETGEAR Switch) #show interfaces switchport 1/0
Port: 1/0
VLAN Membership Mode: General
Access Mode VLAN: 1 (default)
General Mode PVID: 1 (default)
General Mode Ingress Filtering: Disabled
General Mode Acceptable Frame Type: Admit all
General Mode Dynamically Added VLANs:
General Mode Untagged VLANs: 1
General Mode Tagged VLANs:
General Mode Forbidden VLANs:
Trunking Mode Native VLAN: 1 (default)
Trunking Mode Native VLAN tagging: Disable
Trunking Mode VLANs Enabled: All
Protected Port: False
Command example:
(NETGEAR Switch) #show interfaces switchport access 1/0
Intf PVID
--------- ----
1/0 1
Command example:
(NETGEAR Switch) #show interfaces switchport trunk 1/6
Intf PVID Allowed Vlans List
--------- ----- -------------------
1/6 1 All
Command example:
(NETGEAR Switch) #show interfaces switchport general 1/5
Intf PVID Ingress Acceptable Untagged Tagged Forbidden Dynamic
Filtering Frame Type Vlans Vlans Vlans Vlans
--------- ----- ---------- ----------- --------- --------- --------- ---------
1/5 1 Enabled Admit All 7 10-50,55 9,100-200 88,96