NETGEAR M4100 Series ProSAFE

Green Ethernet Commands
529
M4100 Series ProSAFE Managed Switches
Interface Energy-Detect Short-Reach-Config Short-Reach EEE
Config Opr Auto Forced Opr Config
--------- --------- --------- --------- --------- ----------- --------
0/1 Disabled Inactive Disabled
0/2 Disabled Inactive Disabled
0/3 Disabled Inactive Disabled
0/4 Disabled Inactive Disabled
0/5 Disabled Inactive Disabled
0/6 Disabled Inactive Disabled
0/7 Disabled Inactive Disabled
0/8 Disabled Inactive Disabled
0/9 Disabled Inactive Disabled
0/10 Disabled Inactive Disabled
0/11 Disabled Inactive Disabled
0/12 Disabled Inactive Disabled
0/13 Disabled Inactive Disabled
0/14 Disabled Inactive Disabled
0/15 Disabled Inactive Disabled
0/16 Disabled Inactive Disabled
0/17 Disabled Inactive Disabled
0/18 Disabled Inactive Disabled
0/19 Disabled Inactive Disabled
0/20 Disabled Inactive Disabled
0/21 Disabled Inactive Disabled
0/22 Disabled Inactive Disabled
0/23 Disabled Inactive Disabled
0/24 Disabled Inactive Disabled
0/25 Disabled Inactive Disabled
Command example:
(NETGEAR Switch) #show green-mode 0/25
EEE Admin Mode................................. Enabled
Transmit Idle Time......................... 0
Transmit Wake Time......................... 0
Rx Low Power Idle Event Count.............. 0
Rx Low Power Idle Duration (uSec).......... 0
Tx Low Power Idle Event Count.............. 0
Tx Low Power Idle Duration (uSec).......... 0
Tw_sys_tx (usec)........................... XX
Tw_sys_tx Echo (usec)...................... XX
Tw_sys_rx (usec)........................... XX
Tw_sys_rx Echo (usec)...................... XX
Fallback Tw_sys (usec)..................... XX
Tx DLL enabled............................. Yes
Tx DLL ready............................... Yes