B1.5 c3 registers
The processor can access different 32-bit wide system registers. Registers where CRn has the value three
are called c3 registers.
The following table shows the 32-bit wide system registers you can access when the processor is in
AArch32 state and the value of CRn is c3.
Table B1-5 c3 register summary
Op1 CRm Op2 Name Reset Description
0 c0 0 DACR UNK B1.47 Domain Access Control Register on page B1-221
B1 AArch32 system registers
B1.5 c3 registers
100236_0100_00_en Copyright © 2015–2017, 2019 Arm Limited or its affiliates. All rights
reserved.
B1-157
Non-Confidential