C11.12 Cycle Count Control Register
The TRCCCCTLR characteristics are:
Purpose
Sets the threshold value for cycle counting.
Usage constraints
• Accepts writes only when the trace unit is disabled.
• Must be programmed if TRCCONFIGR.CCI==1.
• Minimum value that can be programmed is defined in TRCIDR3.CCITMIN.
Configurations
Available in all configurations.
Attributes
See C11.1 ETM register summary on page C11-733.
31
0
RES0 THRESHOLD
12 11
Figure C11-11 TRCCCCTLR bit assignments
[31:12]
Reserved, RES0.
THRESHOLD, [11:0]
Instruction trace cycle count threshold.
The TRCCCCTLR can be accessed through the external debug interface, offset 0x038.
C11 ETM registers
C11.12 Cycle Count Control Register
100236_0100_00_en Copyright © 2015–2017, 2019 Arm Limited or its affiliates. All rights
reserved.
C11-749
Non-Confidential