B1.10 c7 system operations
System operations are divided into two categories. When the CRn value is c7, these operations are called
c7 system operations.
The following table shows the System operations when CRn is c7 and the processor is in AArch32 state.
See the Arm
®
Architecture Reference Manual Armv8, for Armv8-A architecture profile. for more
information about these operations.
B1 AArch32 system registers
B1.10 c7 system operations
100236_0100_00_en Copyright © 2015–2017, 2019 Arm Limited or its affiliates. All rights
reserved.
B1-162
Non-Confidential