C11.68 ETM Peripheral Identification Register 2
The TRCPIDR2 characteristics are:
Purpose
Provides information to identify a trace component.
Usage constraints
• Only bits[7:0] are valid.
• Accessible only from the external debug interface, offset 0xFE8.
Configurations
Available in all implementations.
Attributes
TRCPIDR2 is a 32-bit RO management register.
See C11.1 ETM register summary on page C11-733.
RES0
31 0
34
DES_1
78
Revision
JEDEC
2
Figure C11-65 TRCPIDR2 bit assignments
[31:8]
Reserved, RES0.
Revision, [7:4]
0x3 r1p0.
JEDEC, [3]
0b1 RES1. Indicates a JEP106 identity code is used.
DES_1, [2:0]
0b011 Arm Limited. This is bits[6:4] of JEP106 ID code.
C11 ETM registers
C11.68 ETM Peripheral Identification Register 2
100236_0100_00_en Copyright © 2015–2017, 2019 Arm Limited or its affiliates. All rights
reserved.
C11-816
Non-Confidential