B1.8 c6 registers
The processor can access different 32-bit wide system registers. Registers where CRn has the value six
are called c6 registers.
The following table shows the 32-bit wide system registers you can access when the processor is in
AArch32 state and the value of CRn is c6.
Table B1-8 c6 register summary
Op1 CRm Op2 Name Reset Description
0 c0 0 DFAR UNK B1.48 Data Fault Address Register on page B1-222
2 IFAR UNK B1.86 Instruction Fault Address Register on page B1-293
4 c0 0 HDFAR UNK B1.64 Hyp Data Fault Address Register on page B1-251
2 HIFAR UNK
B1.65 Hyp Instruction Fault Address Register on page B1-252
4 HPFAR UNK B1.66 Hyp IPA Fault Address Register on page B1-253
B1 AArch32 system registers
B1.8 c6 registers
100236_0100_00_en Copyright © 2015–2017, 2019 Arm Limited or its affiliates. All rights
reserved.
B1-160
Non-Confidential