C10.19 Performance Monitors Component Identification Register 0
The PMCIDR0 characteristics are:
Purpose
Provides information to identify a Performance Monitor component.
Usage constraints
The PMCIDR0 can be accessed through the external debug interface.
The accessibility to the PMCIDR0 by condition code is:
Off DLK OSLK EPMAD SLK Default
- - - - RO RO
C2.2 External register access permissions to the PMU registers on page C2-587 describes the
condition codes.
Configurations
The PMCIDR0 is in the Debug power domain.
Attributes
See the register summary in C10.9 Memory-mapped PMU register summary on page C10-714.
RES0
31 0
PRMBL_0
78
Figure C10-13 PMCIDR0 bit assignments
[31:8]
Reserved, RES0.
Size, [7:0]
0x0D Preamble byte 0.
The PMCIDR0 can be accessed through the external debug interface, offset 0xFF0.
C10 PMU registers
C10.19 Performance Monitors Component Identification Register 0
100236_0100_00_en Copyright © 2015–2017, 2019 Arm Limited or its affiliates. All rights
reserved.
C10-727
Non-Confidential
To Next Page
Loading...
