1 Boolean combined resource pair.
[14:12]
Reserved, RES0.
SEL1, [11:8]
Selects the resource number, based on the value of TYPE1:
When TYPE1 is 0, selects a single selected resource from 0-15 defined by bits[3:0].
When TYPE1 is 1, selects a Boolean combined resource pair from 0-7 defined by bits[2:0].
TYPE0, [7]
Selects the resource type for trace event 0:
0 Single selected resource.
1 Boolean combined resource pair.
[6:4]
Reserved, RES0.
SEL0, [3:0]
Selects the resource number, based on the value of TYPE0:
When TYPE0 is 0, selects a single selected resource from 0-15 defined by bits[3:0].
When TYPE0 is 1, selects a Boolean combined resource pair from 0-7 defined by bits[2:0].
The TRCEVENTCTL0R can be accessed through the external debug interface, offset 0x020.
C11 ETM registers
C11.7 Event Control 0 Register
100236_0100_00_en Copyright © 2015–2017, 2019 Arm Limited or its affiliates. All rights
reserved.
C11-744
Non-Confidential
To Next Page
Loading...
