CNTSEL, [3:0]
Selects the resource number, based on the value of CNTTYPE:
When CNTTYPE is 0, selects a single selected resource from 0-15 defined by bits[3:0].
When CNTTYPE is 1, selects a Boolean combined resource pair from 0-7 defined by bits[2:0].
The TRCCNTCTLR0 can be accessed through the external debug interface, offset 0x150.
C11 ETM registers
C11.22 Counter Control Register 0
100236_0100_00_en Copyright © 2015–2017, 2019 Arm Limited or its affiliates. All rights
reserved.
C11-762
Non-Confidential
To Next Page
Loading...
