EasyManuals Logo

ARM Cortex-A35 User Manual

Default Icon
894 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #209 background imageLoading...
Page #209 background image
1 Executes data cache clean operations as data cache clean and invalidate. The
following operations are affected:
In AArch32, DCCSW is executed as DCCISW, DCCMVAU and DCCMVAC
are executed as DCCIMVAC.
In AArch64, DC CSW is executed as DC CISW, DC CVAU and DC CVAC are
executed as DC CIVAC.
[43:31]
Reserved, RES0.
CDIDIS, [30]
Disable Cryptographic dual issue. The possible values are:
0 Enable dual issue of Advanced SIMD and Cryptographic instructions. This is the
reset value.
1 Disable dual issue of Advanced SIMD and Cryptographic instructions.
DIDIS, [29]
Disable Dual Issue. The possible values are:
0 Enable Dual Issue of instructions. This is the reset value.
1 Disable Dual Issue of all instructions.
RADIS, [28:27]
Write streaming no-allocate threshold. The possible values are:
0b00 16th consecutive streaming cache line does not allocate in the L1 or L2 cache.
0b01 128th consecutive streaming cache line does not allocate in the L1 or L2 cache.
This is the reset value.
0b10 512th consecutive streaming cache line does not allocate in the L1 or L2 cache.
0b11 Disables streaming. All write-allocate lines allocate in the L1 or L2 cache.
L1RADIS, [26:25]
Write streaming no-L1-allocate threshold. The possible values are:
0b00 4th consecutive streaming cache line does not allocate in the L1 cache. This is the
reset value.
0b01 64th consecutive streaming cache line does not allocate in the L1 cache.
0b10 128th consecutive streaming cache line does not allocate in the L1 cache.
0b11 Disables streaming. All write-allocate lines allocate in the L1 cache.
DTAH, [24]
Disable transient and no-read-allocate hints for loads. The possible values are:
0 Normal operation.
1 Transient and no-read-allocate hints in the MAIR are ignored and treated the same
as non-transient, read-allocate types for loads.
The LDNP instruction in AArch64 behaves the same as the equivalent LDP
instruction. This is the reset value.
STBPFRS, [23]
Disable ReadUnique request for prefetch streams initiated by STB accesses:
B1 AArch32 system registers
B1.42 CPU Auxiliary Control Register
100236_0100_00_en Copyright © 2015–2017, 2019 Arm Limited or its affiliates. All rights
reserved.
B1-209
Non-Confidential

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ARM Cortex-A35 and is the answer not in the manual?

ARM Cortex-A35 Specifications

General IconGeneral
BrandARM
ModelCortex-A35
CategoryComputer Hardware
LanguageEnglish

Related product manuals