Lexmark C950 - Fuser Driver High Voltage Error; Fuser Driver Low Voltage Error; Fuser Driver Surge Failure

Diagnostic information 2-53
5058-030
Go Back
Previous
Next
126.05 Fuser driver high voltage error
126.06 Fuser driver low voltage error
126.07 Fuser driver surge failure
2
Replace the fuser driver PCBA.
Go to “Fuser driver PCBA
removal” on page 4-84.
Does the error remain?
Go to step 3. Problem resolved
3
POR the machine.
Does the error continue?
Replace the upper printer engine
PCBA.
Go to “Upper printer engine
PCBA removal” on page 4-181.
Problem resolved
Step Action and questions Yes No
1 Remove the fuser cooling fan. Go
to
“Fuser cooling fan removal”
on page 4-78.
Replace the fuser driver PCBA.
Go to “Fuser driver PCBA
removal” on page 4-84.
Does the error remain?
Go to step 2. Problem resolved
2
POR the machine.
Does the error continue?
Replace the upper printer engine
PCBA.
Go to “Upper printer engine
PCBA removal” on page 4-181.
Problem resolved
Step Action and questions Yes No
1 Remove the fuser cooling fan. Go
to “Fuser cooling fan removal”
on page 4-78.
Replace the fuser driver PCBA.
Go to
“Fuser driver PCBA
removal” on page 4-84.
Does the error remain?
Go to step 2. Problem resolved
2
POR the machine.
Does the error continue?
Replace the upper printer engine
PCBA.
Go to “Upper printer engine
PCBA removal” on page 4-181.
Problem resolved
Step Action and questions Yes No
1 POR the machine.
Does the error continue?
Replace the fuser driver PCBA.
Go to
“Fuser driver PCBA
removal” on page 4-84.
Problem resolved
Step Action and questions Yes No