Lexmark C950 - USB Speed; Wipe All Settings

Diagnostic aids 3-13
5058-030
Go Back
Previous
Next
To change this setting:
1. From the Configuration Menu, navigate to UI Automation.
2. Touch or to change the value.
3. Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
changes.
USB Speed
To change this setting:
1. From the Configuration Menu, navigate to USB Speed.
2. Touch or to change the value.
3. Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
changes.
Wipe All Settings
The purpose of this setting is to make any sensitive information that may exist on the device’s storage
completely indecipherable.
To run this setting:
1. From the Configuration Menu, navigate to Wipe All Settings.
2. The screen displays the following messages
Erase all information on the hard disk?
This will erase all settings, solutions, and jobs on this device.
3. Touch Yes to erase, or touch No to cancel the operation and return to the Configuration Menu without
saving any changes.