Lexmark C950 - Sensor (MPF Feed Out) Late Jam

Diagnostic information 2-129
5058-030
Go Back
Previous
Next
250.06 Sensor (MPF feed out) late jam
Step Action and questions Yes No
1 Check the media path.
Is the media path free of any
media fragments?
Go to step 2. Remove any media or media
fragments.
2
Check the MPF rollers for wear.
Is the MPF feed rollers free of
excess wear?
Go to step 3. Replace the MPF feed rollers. Go
to
“MPF roller removal” on
page 4-121
3
Check the sensor (MPF media
out) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (MPF media
out).
Does the display on the
operator panel change every
time the sensor actuator is
operated?
Go to step 5. Go to step 4.
4
Check the sensor (MPF media
out) for proper connection.
Is the above component
properly connected?
Replace the MPF tray feeder. Go
to
“MPF tray feeder removal”
on page 4-122.
Replace the connections.
5
Check the MPF feed/lift motor for
proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch MPF feed/lift motor
(feed).
5. Touch MPF feed/lift motor
(pick).
Does the above component
operate properly?
Go to step 7. Go to step 6.
6
Check the MPF feed/lift motor for
proper connection.
Is the above component
properly connected?
Replace the MPF tray feeder. Go
to “MPF tray feeder removal”
on page 4-122.
Go to step 7.