Lexmark C950 - Sensor (Media Level) Removal

4-148 Service Manual
5058-030
Go Back
Previous
Next
14. Gently slide the sensor (image calibration) out and remove it.
Sensor (media level) removal
1. Remove the appropriate feeder unit. See “Printer tray 1 feeder removal” on page 4-138, “Tray module
media feeder removal” on page 4-208, “TTM tray 4 media feeder removal” on page 4-221, or “TTM
tray 3 feeder removal” on page 4-217.
2. Release the tabs (A) securing the sensor (media level) to the assembly.