Lexmark C950 - Booklet Front Tamper Motor Removal

Repair information 4-255
5058-030
Go Back
Previous
Next
3. Remove the two screws securing the booklet front tamper guide from the rack.
4. Remove the front tamper guide (A).
Booklet front tamper motor removal
1. Remove the booklet unit assembly. See “Booklet unit chassis removal” on page 4-263.
2. Remove the booklet unit assembly left cover. See “Booklet unit assembly left cover removal” on
page 4-262.
3. Disconnect the connector from the booklet front tamper motor.
Right
B
A
Left