Lexmark C950 - Sensor (Compiler Media Present) Late Jam

2-198 Service Manual
5058-030
Go Back
Previous
Next
487.05 Sensor (compiler media present) late jam
9
POR the machine.
Does the error continue?
Replace the finisher PCBA.
Go to “Finisher PCBA removal”
on page 4-281.
Problem resolved
Step Action and questions Yes No
1 Check the media path.
Is the media path free of any
media fragments?
Go to step 2. Remove any media or media
fragments.
2
Check the eject roll shaft for
damage and contamination.
Is the above component free of
damage and contamination?
Go to Step 3. Replace the eject roll shaft. Go to
“Eject roll shaft removal” on
page 4-270.
3
Check the clamp drive motor for
proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch FINISHER MOTOR
TESTS.
4. Touch Media eject clamp
motor (clamp).
5. Touch Media eject clamp
motor (unclamp).
Does the above component
operate properly?
Go to step 5. Go to step 4.
4
Check the clamp drive motor for
proper connection.
Is the above component
properly connected?
Replace the clamp drive motor.
Go to “Clamp drive motor
removal” on page 4-268.
Replace the connection.
Step Action and questions Yes No