Diagnostic aids 3-29
5058-030
201-202 paper jams
If the jammed paper is visible in the standard exit bin, then firmly grasp the paper on each side, and then gently
pull it out.
Note: Make sure all paper fragments are removed.
Paper jam in the fuser
1. Open door A by lifting the release latch and lowering the door.
2. Pull the green lever down.
3. Firmly grasp the jammed paper on each side, and then gently pull it out.
Warning: Do not touch the center of the fuser unit. Doing so will damage the fuser.
Note: Make sure all paper fragments are removed.
CAUTION—HOT SURFACE:
The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow
the surface to cool before touching.
To Next Page
Loading...
