EasyManua.ls Logo

Lexmark C950 - Finisher Motor Tests; Output bin Tests; Feed Tests (Output Bin)

Lexmark C950
1014 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Diagnostic aids 3-21
5058-030
Go Back
Previous
Next
FINISHER MOTOR TESTS
To run these tests:
1. From the Diagnostics Menu, navigate to MOTOR TESTS.
2. Select FINISHER MOTOR TESTS.
3. Select the test from the following options:
OUTPUT BIN TESTS
Feed Tests (Output Bin)
This test is used to verify that media from the device’s default input source can be fed to a specific output bin. No
information is printed on the feed test pages.
To run the Feed Tests for the output bins:
1. From the Diagnostics Menu, navigate to OUTPUT BIN TESTS.
2. Touch Feed Tests.
3. Touch the output bin you want the paper to exit into. The standard bin as well as any output option bin
installed on the printer is shown on the menu.
Standard Bin
Output Bin [1-3]
4. Touch either Single or Continuous.
Single—Feeds one sheet of media from the selected source.
Continuous—Media continues feeding from the selected source until Stop is pressed.
Press Stop to return to the [Selected Output Bin].
Available tests:
Buffer/transport motor Punch carriage shift motor (forward)
Entrance/paddle motor Punch carriage shift motor (rearward)
Exit motor Punch unit motor
Finisher diverter gate solenoid
(upper bin)
Bridge unit motor
Finisher diverter gate solenoid
(stacker bin)
Decurler cam clutch
Sub paddle solenoid Booklet folding/exit motor (forward)
Buffer diverter gate solenoid Booklet folding/exit motor (reverse)
Front tamper motor (forward) Booklet knife solenoid
Front tamper motor (rearward) Booklet end guide motor (down)
Rear tamper motor (forward) Booklet stapler motor
Rear tamper motor (rearward) Booklet bin motor
Stapler carriage motor (forward) Booklet paddle motor
Stapler carriage motor (rearward) Booklet tamper front motor (reverse)
Media eject clutch Booklet tamper front motor (forward)
Media eject clamp motor (unclamp) Booklet tamper rear motor (forward)
Media eject clamp motor (clamp) Booklet tamper rear motor (reverse)
Media eject motor (forward) Booklet entrance motor
Media eject motor (reverse) Booklet diverter gate solenoid (bin)
Stacker bin lift motor (up) Booklet diverter gate solenoid (booklet)
Stacker bin lift motor (down)

Table of Contents

Other manuals for Lexmark C950

Related product manuals