Lexmark C950 - HCF Sensor (HCF Media Tray Set) Removal

4-372 Service Manual
5058-030
Go Back
Previous
Next
5. Release the hooks securing the sensor (HCF media size R) (A) or the sensor (HCF media size L) (B) to the
unit.
6. Remove the sensor (HCF media size R) (A) or the sensor (HCF media size L) (B).
HCF sensor (HCF media tray set) removal
1. Pull out the HCF media tray.
2. Remove the HCF left cover. See “HCF left cover removal” on page 4-362.
3. Remove the HCF rear cover. See “HCF rear cover removal” on page 4-371.
4. Disconnect the connector from the sensor (HCF media tray set) (A).
A
B
Front
Connectors