Lexmark C950 - Finisher LVPS PCBA Removal

Repair information 4-279
5058-030
Go Back
Previous
Next
Reinstallation notes:
• Make sure the finisher left carriage belt assembly (G) is inserted into the upper belt clamp (F) as shown.
• Make sure the bin bracket (C) is level to prevent binding.
Finisher LVPS PCBA removal
1. Remove the right lower cover. See “Upper media bin front cover removal” on page 4-353.
2. Disconnect all the connectors from the finisher LVPS PCBA (A).
Front
G
F
E
D
C
H