Repair information 4-331
5058-030
5. Release the hooks securing the sensor to the bracket (B).
6. Remove the sensor (stacker bin level encoder) (A).
Sensor (stacker bin level F) removal
1. Remove the finisher front door assembly. See “Finisher front door assembly removal” on page 4-276.
2. Remove the rear upper cover. See “Rear upper cover removal” on page 4-309.
3. Disconnect the connector from the sensor (stacker bin level F) (A).
4. Remove the screw securing the sensor (stacker bin level F) (A) to the finisher.
5. Remove the sensor (stacker bin level F) (A).
Sensor (stacker bin level R) removal
1. Remove the finisher front door assembly. See “Finisher front door assembly removal” on page 4-276.
2. Remove the rear upper cover. See “Rear upper cover removal” on page 4-309.
To Next Page
Loading...
