Lexmark C950 Service Manual

Diagnostic aids 3-131
5058-030
Go Back
Previous
Next
• When the power is turned off and on while the tray is at the feeding position, the sensor (media level) is on
when the power is turned on, and the remaining media volume before the previous power off is regarded
as the remaining media volume.
• If the sensor (media level) is off when the power is turned on, the HCF regards the HCF media tray as
having been removed, and determines the remaining media volume based on the time from the media feed
lift motor forward/reverse rotation until the sensor (media level) comes on.
Sensor (media level)
Detects the media feeding position in the tray in order to control the media position.
While this sensor (media level) is off, lifting the tray is continued until the sensor (media level) turns on.
Sensor (media level)
HCF pick solenoid
HCF feed lift motor
Front

Lexmark C950 Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Processor Speed	1.2 GHz
Connectivity	Ethernet, USB
Print Technology	Laser
Print Speed	50 ppm
Monthly Duty Cycle	300000 pages
Recommended Monthly Page Volume	5, 000 - 33, 000 pages
Memory	1024 MB
Hard Drive	Optional
Output Capacity	500 sheets
Interface	USB 2.0
Media Type	Plain paper, Card stock, Labels, Envelopes, Transparencies
Total Media Capacity	5140 sheets
Media Sizes	Letter, Legal, A4, A5, Executive, Folio, Statement
Operating Systems Supported	Windows, Mac, Linux