Lexmark C950 - Stacker Media bin Assembly Removal; Stapler Unit Assembly Removal

4-340 Service Manual
5058-030
Go Back
Previous
Next
Stacker media bin assembly removal
1. Release the two hooks securing the stacker media bin assembly (A) to the finisher.
2. Lift the stacker media bin assembly (A) upward.
3. Remove the stacker media bin assembly. (A).
Stapler unit assembly removal
1. Remove the finisher front door assembly. See “Finisher front door assembly removal” on page 4-276.
2. Remove the staple cartridge.
3. Remove the rear upper cover. See “Rear upper cover removal” on page 4-309.
4. Remove the rear lower cover. See “Upper media bin front cover removal” on page 4-353.
5. Remove the stapler unit frame. See “Stapler unit frame removal” on page 4-342.
A