Lexmark C950 Service Manual

Diagnostic information 2-29
5058-030
Go Back
Previous
Next
4xx service error codes
Error code Description Action
401.01
Service finisher error
Sensor (finisher media entrance) static
jam.
Media remains detected by the sensor
(finisher media entrance).
Go to “401.01 Sensor (finisher media
entrance) static jam” on page 2-177.
401.03
Service finisher error
Sensor (bridge media entrance) late
jam
The media is late reaching the sensor
(bridge unit media entrance) within the
specified time.
Go to “401.03 Sensor (bridge media
entrance) late jam” on page 2-178.
401.05
Service finisher error
Sensor (bridge media entrance) lag
jam
The sensor (bridge media entrance)
activated, but did not clear within the
specified time.
402.01
Service finisher error
Sensor (bridge media exit) static jam Media remains detected by the sensor
(bridge media exit).
Go to “402.01 Sensor (bridge media
exit) static jam” on page 2-180.
402.03
Service finisher error
Sensor (bridge media exit) late jam The media is late reaching the sensor
(bridge media exit) within the specified
time.
Go to “402.03 Sensor (bridge media
exit) late jam” on page 2-182.
481.01
Service finisher error
Sensor (finisher media entrance) static
jam
Media remains detected by the sensor
(finisher media entrance).
Go to “401.01 Sensor (finisher media
entrance) static jam” on page 2-177.
481.03
Service finisher error
Sensor (finisher media entrance) late
jam
The media is late reaching the sensor
(bridge media exit) within the specified
time.
Go to “481.03 Sensor (finisher media
entrance) late jam” on page 2-184.
482.01
Service finisher error
Sensor (diverter gate) static jam A (to
stacker bin)
Media remains detected by the sensor
(diverter gate).
Go to “482.01 Sensor (diverter gate)
static jam A (to stacker bin)” on
page 2-184.
482.01
Service finisher error
Sensor (diverter gate) static jam B (to
stacker bin)
Media remains detected by the sensor
(diverter gate).
Go to “482.01 Sensor (diverter gate)
static jam B (to top bin)” on page 2-185.
482.03
Service finisher error
Sensor (diverter gate) late jam The media is late reaching the sensor
(diverter gate) within the specified time.
Go to “482.03 Sensor (diverter gate) late
jam” on page 2-186.
483.01
Service finisher error
Sensor (buffer path) static jam Media remains detected by the sensor
(buffer path).
Go to “483.01 Sensor (buffer path) static
jam” on page 2-187.

Lexmark C950 Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Processor Speed	1.2 GHz
Connectivity	Ethernet, USB
Print Technology	Laser
Print Speed	50 ppm
Monthly Duty Cycle	300000 pages
Recommended Monthly Page Volume	5, 000 - 33, 000 pages
Memory	1024 MB
Hard Drive	Optional
Output Capacity	500 sheets
Interface	USB 2.0
Media Type	Plain paper, Card stock, Labels, Envelopes, Transparencies
Total Media Capacity	5140 sheets
Media Sizes	Letter, Legal, A4, A5, Executive, Folio, Statement
Operating Systems Supported	Windows, Mac, Linux