Lexmark C950 Service Manual

2-30 Service Manual
5058-030
Go Back
Previous
Next
483.03
Service finisher error
Sensor (buffer path) late jam The media is late reaching the sensor
(diverter gate) within the specified time.
Go to “483.03 Sensor (buffer path) late
jam” on page 2-188.
484.01
Service finisher error
Sensor (compiler media present) static
jam
Media remains detected by the sensor
(stacker bin no media).
Go to “484.01 Sensor (compiler media
present) static jam” on page 2-190.
485.01
Service finisher error
Sensor (upper media exit) static jam Media remains detected by the sensor
(upper media exit).
Go to “485.01 Sensor (upper media exit)
static jam” on page 2-191.
485.03
Service finisher error
Sensor (upper media exit) late jam The media is late reaching the sensor
(upper media exit) within the specified
time.
Go to “485.03 Sensor (upper media exit)
late jam” on page 2-192.
485.05
Service finisher error
Sensor (upper media exit) lag jam The sensor (upper media exit) activated,
but did not clear within the specified time.
Go to “485.05 Sensor (upper media exit)
lag jam” on page 2-193.
486.01
Service finisher error
Sensor (lower media exit) static jam Media remains detected by the sensor
(lower media exit).
Go to “486.01 Sensor (lower media exit)
static jam” on page 2-194.
486.03
Service finisher error
Sensor (lower media exit) late jam The media is late reaching the sensor
(upper media exit) within the specified
time.
Go to “486.03 Sensor (lower media exit)
late jam” on page 2-195.
486.05
Service finisher error
Sensor (lower media exit) lag jam The sensor (lower media exit) activated,
but did not clear within the specified time.
Go to “486.05 Sensor (lower media exit)
lag jam” on page 2-196.
487.05
Service finisher error
Sensor (compiler media present) lag
jam
The sensor (compiler media present)
activated, but did not clear within the
specified time.
Go to “487.05 Sensor (compiler media
present) late jam” on page 2-198.
491.01
Service finisher error
Sensor (booklet media entrance) static
jam
Media remains detected by the sensor
(booklet media entrance).
Go to “491.01 Sensor (booklet media
entrance) static jam” on page 2-200.
491.03
Service finisher error
Sensor (booklet media entrance) late
jam
The media is late reaching the sensor
(booklet media entrance) within the
specified time.
Go to “491.03 Sensor (booklet media
entrance) late jam” on page 2-200.
4xx service error codes
Error code Description Action

Lexmark C950 Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Processor Speed	1.2 GHz
Connectivity	Ethernet, USB
Print Technology	Laser
Print Speed	50 ppm
Monthly Duty Cycle	300000 pages
Recommended Monthly Page Volume	5, 000 - 33, 000 pages
Memory	1024 MB
Hard Drive	Optional
Output Capacity	500 sheets
Interface	USB 2.0
Media Type	Plain paper, Card stock, Labels, Envelopes, Transparencies
Total Media Capacity	5140 sheets
Media Sizes	Letter, Legal, A4, A5, Executive, Folio, Statement
Operating Systems Supported	Windows, Mac, Linux