Repair information 4-135
5058-030
13. Remove the six screws (G) securing the PC/developer drive motor to the machine.
14. Remove the PC developer drive motor from the machine.
Pick roller removal
1. Remove the appropriate media tray. See “Printer tray 1 feeder removal” on page 4-138, “Tray module
media feeder removal” on page 4-208, “TTM tray 4 media feeder removal” on page 4-221, or “TTM
tray 3 feeder removal” on page 4-217.
2. Slide the plastic media guide toward the front of the machine.
To Next Page
Loading...
