Lexmark C950 Service Manual

Diagnostic information 2-73
5058-030
Go Back
Previous
Next
175.05 Suction fan failure
175.06 Center exhaust fan failure
175.07 Fuser driver PCBA cooling fan failure
3
POR the machine.
Does the error continue?
Replace the upper printer engine
PCBA.
Go to “Upper printer engine
PCBA removal” on page 4-181.
Problem resolved
Step Action and questions Yes No
1 Check the suction fan.
Is the above component
properly connected?
Go to step 2. Replace the connections.
2
Replace the suction fan. Go to
“Suction fan removal” on
page 4-170.
Does the error continue?
Go to step 3. Problem resolved
3
POR the machine.
Does the error continue?
Replace the upper printer engine
PCBA.
Go to “Upper printer engine
PCBA removal” on page 4-181.
Problem resolved
Step Action and questions Yes No
1 Check the center exhaust fan.
Is the above component
properly connected?
Go to step 2. Replace the connections.
2
Replace the center exhaust fan.
Does the error continue?
Go to step 3. Problem resolved
3
POR the machine.
Does the error continue?
Replace the lower engine PCBA.
Go to “Lower engine PCBA
removal” on page 4-98.
Problem resolved
Step Action and questions Yes No
1 Check the fuser driver PCBA
cooling fan.
Is the above component
properly connected?
Go to step 2. Replace the connections.
Step Action and questions Yes No

Lexmark C950 Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Processor Speed	1.2 GHz
Connectivity	Ethernet, USB
Print Technology	Laser
Print Speed	50 ppm
Monthly Duty Cycle	300000 pages
Recommended Monthly Page Volume	5, 000 - 33, 000 pages
Memory	1024 MB
Hard Drive	Optional
Output Capacity	500 sheets
Interface	USB 2.0
Media Type	Plain paper, Card stock, Labels, Envelopes, Transparencies
Total Media Capacity	5140 sheets
Media Sizes	Letter, Legal, A4, A5, Executive, Folio, Statement
Operating Systems Supported	Windows, Mac, Linux