Repair information 4-265
5058-030
7. Remove the three screws securing the booklet unit gear train frame (A) from the booklet unit.
8. Remove the booklet unit gear train frame (A).
Buffer diverter gate removal
1. Open the finisher front door assembly.
2. Move the lower pinch guide assembly (A) to the right.
3. Remove the rear upper cover. See “Rear upper cover removal” on page 4-309.
4. Remove the buffer diverter gate solenoid. See “Buffer diverter gate solenoid removal” on page 4-266.
To Next Page
Loading...
